103-PB-045A - Nuova Fima dans les ventes en France

Panel Mounting-1 to 5 bar with glycerin, AISI 316L Tube & Socket,1/2" bottom connection

6 Bar, 1/2" NPT Bottom Connection with back mounting bracket.

Pressure gauge Type: 01.18.2.A.E.43M.P01 Execution: all st.st. bourdon tube pressure gauge, MGS18/2/A/E fillable with silicone oil Mounting: direct Diameter: DN 100 Connection: 1/2" NPT male bottom Range: 0-250 bar Case material: bayonet-lock case in st.st. AISI 304 Window material: glass Accuracy: 1,0

Pressure gauge Type: 01.18.2.D.E.43M.P01 Execution: all st.st. bourdon tube pressure gauge, MGS18/2/D/E fillable with silicone oil Mounting: direct Diameter: DN 100 Connection: 1/2" NPT male back Range: 0-250 bar Case material: bayonet-lock case in st.st. AISI 304 Window material: glass Accuracy: 1,0

Manometer - 0 to 16 Bar 160mm

Manometer - 0 to 250 Bar 160mm

Manometer - 0 to 16 Bar 160mm

Manometer - 0 to 250 Bar 160mm

Digital Portable Manometer Series 2000 Type 2028P (Extended Version) For Pressure, Vacuum and Differential pressure Battery operated Hand-Held with LCD-Display Range: 0-1 bar (max. Overrange 2 bar) Display range: 0,0-199,9 mbar and 0-1000 mbar Accuracy: 0,15% rdg + 0,15% FSO +1digit Switchable to Pa, inH2O, mH2O, inHg, mHG, PSI (Display range acc. to data-sheet) Pressure ports: 2 x tube connection for tube 4 mm inner diam. / 6 mm outer diam. Display Backlight (switchable) Zero setting by keypress HOLD-Function Automatic Switch of the Display resolution can be deactivated MAX/MIN Memory Number of pushbuttoms: 8 Protection: IP 67 (with connected tubes) Battery Type: 2 x AA, 1,5 V (not included in delivery)

Pressure Gauge 6" Dial size. Range 0-15 PSIG, 1/2" Bottom Con.

pressure switch

00020 201071825 GAUGE:PRESS;0-10KG/CM2,1/8IN,NPT,2-1/2IN GAUGE: PRESSURE RANGE: 0-10 KILOGRAM PER SQUARE CENTIMETER CONNECTION SIZE: 1/8 IN CONNECTION: NATIONAL PIPE THREAD FACE SIZE: 2-1/2 IN CONNECTION LOCATION: LOWER MANUFACTURER: NUOVA FIMA MODEL NUMBER: 52240251060000 *PHOTOS ATTACHED* 00030 201090588 TRANSDUCER:ELECTRO PNEUMATIC,4 TO 20MA,%

TEMPERATURE GAUGE, RANGE 0-160C, APPLICABLE SERIAL NO 2758/02

TEMPERATURE GAUGE, RANGE 0-200C, APPLICABLE SERIAL NO 2758/06

thermostat

(Test- und Konformitätserklärung 3.1 von NUOVA FIMA)

Differential pressure gauge Range : 600 m bar, Dial Size: 4" The ordering code is : 2 16 1 A E --- A 600Mbar 43M S31 R10

Pressure sensor Type: 08.S18 Execution: pressure sensor with ceramic cell Accuracy: 0,5% F.S.V acc. to IEC 60770-Limit point Electrical connection: Male and female plug DIN 43650 Specification Code acc. to Data-sheet 08 = Electronics S18 = Pressure transmitter AAFJ = 0-40 bar 23M = process connection: 1/4 NPT male 1 = output: 4...20 mA- 2 wires , supply: 8...30 V

ST 18 PRESSURE TRANSMITTER

Pressure sensor Type: 08.S18 Execution: pressure sensor with ceramic cell Accuracy: 0,5% F.S.V acc. to IEC 60770-Limit point Electrical connection: Male and female plug DIN 43650 Specification Code acc. to Data-sheet 08 = Electronics S18 = Pressure transmitter 0-600 bar = range 43M = process connection: 1/2 NPT male 10E = output: 4-20 mA, 2 wire / supply: 10..30 VDC Please check the process connection and output. It was not specified in the inquiry.

Pressure sensor Type: 08.S18 Execution: pressure sensor with ceramic cell Accuracy: 0,25 % F.S.V acc. to IEC 60770-Limit point Electrical connection: Male and female plug DIN 43650 Specification Code acc. to Data-sheet 08 = Electronics S18 = Pressure transmitter AAFE = 0-16 bar 23M = process connection: 1/4 NPT male 1 = output: 4...20 mA- 2 wires , supply: 8...30 V FPM = Viton gasket K02 = accuracy 0,25%

Statistische Warennummer: 90262040 Pressure transmitter with local readout for homogenizer Type: 08.MOM.3.A.E.AAFZ (0...400 bar).422.1. Filling liquid: dielectric oil Mounting: direct, bottom connection Dial diameter: 100 mm Process connection: SA422 Range: 0-400 bar case in st.st. AISI 304 glass window Output: 4-20 mA Power Supply: 10...30Vcc with logo "NUOVA FIMA" and "LR"

Pressure gauge Type: 1.20.3.A.E.41M. Execution: all st.st. bourdon tube pressure gauge Solid front execution, glycerine filled Mounting:direct dial diameter: DN 100 Range: 0-16 bar Case material: bayonet-lock case in st.st. AISI 304 window material: safety glass accuracy: Kl. 1,0 with diaphragm seal MGS 9/2B 4.2B0.9.9.43F.41F.BAI diaphragm in Hastelloy C276 process connecion in Hastelloy C276 process connection: 1/2" NPT female

(Type de manomètre: 01.18.1.AG43M.T01 exécution: tous manomètre à tube de bourdon de St.St. Montage: Diamètre directe: DN 150 (6 ") Raccordement: 1/2" NPT, Range bas: 0/100 matériau bar de cas: cas à verrouillage à baïonnette dans St.St. AISI 304 matériau de la fenêtre: Précision de verre:. Kl 1.0 Promotions: tropicalisation + joint membrane MGS 9/111 04.111.4.4.41F.43M connexion de jauge: 1/2 "BSP raccord process: 1/2 "NPT)

pressure gauge range 0 – 400 Bar

KAMERA

Master gauge (10” dial size), 30 Bar: 1 nos Accuracy +/- 0.1%

Master gauge (10” dial size), 250 Bar: 1 nos , Accuracy +/- 0.1%

(version "all stainless steel": DN 63) 1.18.3.DC0/16 BAR.21M